| |
Curved Needle Overedge
One and Two needle
FOR KNITS
- Seaming - light to medium weight materials -
39500QB, CQB, XEQB, CXEQB subclasses:
One needle, differential feed overedge seaming.
Seaming - medium to heavy weight
materials -
39500RF, CRF, XERF subclasses: One needle, differential
feed overedge seaming.
Seaming - heavy weight materials -
39500QP subclass:
One needle, differential feed overedge seaming.
Seaming with Reinforced Tape - light to
medium
weight materials - 39500RA subclass: One needle,
differential feed overedge seaming with tape.
Blind Hemming without Seams - light to
medium
weight materials - 39500RN, XERN, SD, CSD, XESD,
CXESD subclasses: One needle,
differential feed overedge
blindhemmer.
Collar Attaching - light to medium
weight materials -
39500SE subclass: One needle, differential feed overedge
collar attaching.
FOR WOVENS
- Seaming - medium to heavy weight materials -
39500QN, QW subclasses: One and two
needle, plain and differential feed overedge seaming.
Edge Finishing—light to medium weight
materials -
39500QJ, QL subclasses: One needle, plain feed overedge
edge finishing.
Intermittent Shirring & Seaming - light
to medium
weight materials - 39500TM, TT subclasses: One needle,
differential feed overedge shirring.
Zipper Attaching - medium to heavy
weight materials - 39500QX, RU, CRU subclasses: One
needle, plain feed
overedge zipper attaching.
FOR HOSIERY
- Seaming - light weight hosiery materials
- 39500RB,
XERB, ST, TA, XETA, HUGC, RBAC, UEZ subclasses:
One and two needle, differential feed hosiery seamers.
FOR SOCKS
- Seaming - light to medium weight sock
materials -
39500RC, CRC, XERC subclasses: Two
needle, differential
feed sock seamers.
|
|
|
Model
(For Knits) |
39500QB, CQB, XEQB, CXEQB |
39500RF,
CRF, XERF |
39500RN, XERN |
39500SD, CSD, XESD, CXESD |
39500QP |
39500RA |
39500SE |
| Needle |
154GAS055/022~150/060 |
|
standard 070/027 |
standard
090/036 |
standard
100/040 |
standard
080/032 |
| Material Weight |
light
to
medium knits |
medium to
heavy knits |
light to medium knits |
heavy knit,
fleece,
polar fleece |
light to medium knits |
| Stitch Length Adj. |
by changing stitch cams |
| Differential Feed
Adj. |
by changing stitch cams |
| Lubrication |
automatic |
| Lubricating Oil |
Union Special Spec 175 (ISO grade
22) |
| Stitch Type |
504 |
503 |
504 |
| Seam Type |
SSa-1 |
EFc-1 |
SSa-1 |
| 39500QB and CQB |
1 |
3 |
1/8" or 5/32" |
.85~3.2
(2.1 standard) |
L~M |
8000 RPM |
| 39500XEQB and CXEQB |
1 |
3 |
1/8" or 5/32" |
.85~3.2
(2.1 standard) |
L~M |
9000 RPM |
| 39500RF and CRF |
1 |
3 |
3/32" or 1/8" |
.85~3.2
(2.1 standard) |
M~H |
8000 RPM |
| 39500XERF |
1 |
3 |
1/8" |
.85~3.2
(2.1 standard) |
M~H |
9000 RPM |
| 39500QP |
1 |
3 |
1/8" |
1.3~3.2
(2.1 standard) |
H |
7500 RPM |
| 39500RA |
1 |
3 |
5/32" |
1.6~4.2
(3.2 standard) |
L~M |
7500 RPM |
| 39500RN |
1 |
2 |
3/32" |
.85~3.2
(2.1 standard) |
L~M |
8000 RPM |
| 39500XERN |
1 |
2 |
3/32" |
.85~3.2
(2.1 standard) |
L~M |
9000 RPM |
| 39500SD and CSD |
1 |
2 |
1/8" |
.85~3.2
(2.1 standard) |
L~M |
8000 RPM |
| 39500XESD and CXESD |
1 |
2 |
1/8" |
.85~3.2
(2.1 standard) |
L~M |
9000 RPM |
| 39500SE |
1 |
3 |
1/8" |
.85~3.2
(2.1 standard) |
L~M |
8000 RPM |
|
 |
SEAMING KNITS
LIGHT TO MEDIUM WEIGHT39500QB1/8 and 5/32
(1/8" and 5/32" seam widths)
1 needle, 3 thread, differential feed,
curved needle Mark IV overedge. For trimming and seaming T-shirts,
blouses, polo shirts, pajamas, nightgowns, children's shorts,
pants, sleepers and similar knit garments.
39500CQB1/8 and 5/32 (1/8" and 5/32" seam
widths)
Same as 39500QB, except with pneumatic Air Klipp® chain
cutter.
39500XEQB1/8 and 5/32 (1/8" and 5/32"
seam widths)
1 needle, 3 thread, differential feed, curved needle 9M
(9000RPM) overedge, with external oil pump and oil cooler. For
trimming and seaming T-shirts, blouses, polo shirts, pajamas,
nightgowns, children's shorts, pants, sleepers and similar knit
garments.
39500CXEQB1/8 and 5/32 (1/8" and 5/32" seam
widths) Same as 39500XEQB, except with pneumatic Air Klipp®
chain cutter. |
|
 |
SEAMING KNITS
MEDIUM TO HEAVY WEIGHT39500RF3/32 and 1/8
(3/32" and 1/8" seam widths)
1 needle, 3 thread, differential feed,
curved needle Mark IV overedge. For trimming and seaming heavy
T-shirts, sweatshirts, sweatpants, polo shirts, shorts, knit
slacks, sleepers and similar knit or polar fleece garments.
39500CRF1/8 (1/8" seam width)
Same as 39500RF, except with pneumatic Air Klipp® chain
cutter.
39500XERF1/8 (1/8" seam width)
1 needle, 3 thread, differential feed, curved needle 9M
(9000RPM) overedge, with external oil pump and oil cooler. For
trimming and seaming heavy T-shirts, sweatshirts, sweatpants, polo
shirts, shorts, knit slacks, sleepers and similar knit or polar
fleece garments. |
|
 |
SEAMING KNITS
HEAVY WEIGHT39500QP (1/8" seam width)
1 needle, 3 thread, differential feed,
curved needle Mark IV overedge, with coarse-tooth feed dogs. For
trimming and seaming, heavy sweatshirts, sweatpants, and similar
heavy fleece or polar fleece activewear. |
|
 |
SEAMING KNITS
WITH REINFORCED TAPE
LIGHT TO MEDIUM WEIGHT39500RA (5/32" seam
width)
1 needle, 3 thread, differential feed,
curved needle Mark IV overedge, with tape slot in presser foot,
coarse-tooth feed dogs and wide material trimming knives. For
trimming, seaming and simultaneously inserting a reinforced tape
on shoulder seams of T-shirts, polo
shirts and similar garments. |
 |
BLIND HEMMING KNITS
WITHOUT SEAMS
LIGHT TO MEDIUM WEIGHT39500RN (3/32" seam
width)
1 Needle, 2 Thread Differential Feed curved needle Mark IV
overedge, for automated sewing units, includes 12.7mm, 19mm, and
25.4mm hemmers. For trimming and blind hemming sleeves and bottoms
of T-shirts,
A-shirts, polo shirts and similar products.
39500XERN (3/32" seam width)
Same as 39500RN, except in 9M (9000 RPM) with external oil
pump and oil cooler.
39500SD1/8 (1/8" seam width)
1 Needle, 2 Thread Differential Feed curved needle Mark IV
overedge, with swing-out cloth plate, includes 12.7mm, 19mm, and
25.4mm hemmers. For trimming and blind hemming sleeves and bottoms
of T-shirts,
A-shirts, polo shirts and similar products.
39500CSD1/8 (1/8" seam width)
Same as 39500SD, except with pneumatic Air Klipp® chain
cutter.
39500XESD1/8 (1/8" seam width)
Same as 39500SD, except in 9M (9000 RPM) with external oil
pump and oil cooler.
39500CXESD1/8 (1/8" seam width)
Same as 39500SD, except with pneumatic Air Klipp® chain cutter
and in 9M (9000 RPM) with external oil pump and oil cooler. |
|
 |
COLLAR ATTACHING ON KNITS
LIGHT TO MEDIUM WEIGHT39500SE1/8 (1/8"
seam width)
1 Needle, 3 Thread Differential Feed curved needle Mark IV
overedge, with fine-tooth feed dogs and sewing combination to
accept collarette folder. Does not include folder. For seaming and
attaching collars to T-shirts
|
|
|
Model
(For Wovens) |
39500QJ |
39500QL |
39500QN
39500QX |
39500TM |
39500QW |
39500TT |
39500RU,CRU |
| Needle |
154GAS055/022~150/060 |
|
standard 090/036 |
standard 100/040 |
standard
090/036 |
standard
110/044 |
| Material Weight |
light to medium
woven cotton, linen,
denim |
medium to heavy, woven cotton,
linen, denim |
light to medium
woven cotton,
linen, denim |
medium to heavy, woven cotton, linen, denim |
light to medium
woven cotton, linen, denim |
medium to heavy woven cotton,
linen, denim |
| Stitch Length Adj. |
by changing stitch cams |
| Differential Feed
Adj. |
plain feed |
lever |
cam |
lever |
plain feed |
| Lubrication |
automatic |
| Lubricating Oil |
Union Special Spec 175 (ISO grade
22) |
| Stitch Type |
503 |
505 |
504 |
504 |
512 |
504 |
| Seam Type |
EFd-1 |
SSa-1 |
SSa-1 |
| 39500QN |
1 |
3 |
3/16" |
1.3~3.2
(2.1 standard) |
M~H |
7500 RPM |
| 39500QW |
2 |
4 |
17/64" |
1.3~3.2
(2.1 standard) |
M~H |
7500 RPM |
| 39500QJ |
1 |
2 |
3/16" |
3.2~6.4
(5.1 standard) |
L~M |
7500 RPM |
| 39500QL |
1 |
3 |
3/16" |
3.2~6.4
(5.1 standard) |
L~M |
7500 RPM |
| 39500TM |
1 |
3 |
3/16" |
1.3~3.2
(2.1 standard) |
L~M |
6000 RPM |
| 39500TT |
1 |
3 |
3/16" |
1.3~3.2
(2.1 standard) |
L~M |
6000 RPM |
| 39500QX |
1 |
3 |
3/8" |
1.6~4.2
(2.5 standard) |
M~H |
7500 RPM |
| 39500RU and CRU |
1 |
3 |
3/16" |
2.5~6.4
(2.5 standard) |
M~H |
7500 RPM |
|
 |
SEAMING WOVENS
MEDIUM TO HEAVY WEIGHT39500QN (3/16" seam
width)
1 needle, 3 thread plain feed curved needle Mark IV
overedge, with wide presser foot. For trimming and seaming
operations on snowsuits, jackets, ski pants, garment pockets and
similar garments.
39500QW (17/64" seam width)
2 needle, 4 thread differential feed curved needle
simulated safety stitch Mark IV overedge, with coarse-
tooth dogs and wide material trimming knives. For trimming and
seaming operations on drapery panels, pajamas, women’s &
children’s pants and similar garments. |
|
 |
EDGE FINISHING on WOVENS
LIGHT TO MEDIUM WEIGHT39500QJ (3/16" seam
width)
1 needle, 2 thread plain feed curved needle Mark IV
overedge, with wide material trimming knives and long stitch
length. For serging the edge of trouser and skirt panels to
prevent cloth from raveling.
39500QL (3/16" seam width)
Same as 39500QJ except with 3 thread box edge stitch. |
|
 |
INTERMITTENT SHIRRING & SEAMING
on WOVENS
LIGHT TO MEDIUM WEIGHT:39500TM (3/16"
seam width)
1 needle, 3 thread intermittent differential feed curved
needle Mark IV overedge, with 5 to
1 shirring ratio at 4 SPI. For
seaming and intermittent shirring sleeves of women’s blouses,
slips and nightgowns and men’s shirts.
39500TT (3/16" seam width)
Same as 39500TM except with 3 to 1 shirring ratio at 14
SPI. |
|
 |
ZIPPER ATTACHING on WOVENS
MEDIUM TO HEAVY WEIGHT39500QX (3/8" seam
width)
1 needle 3 thread plain feed curved needle Mark IV
overedge, with adjustable channel in presser foot for zipper teeth
and wide material trimming knives. For attaching zipper tape
without slide, to pants and jeans fronts.
39500RU (3/16" seam width)
1 needle 3 thread plain feed curved needle Mark IV
overedge, with wide material trimming knives and narrow
presser foot to allow zipper teeth with slider and staples
to pass freely. For attaching zipper with slide and staple to
pants and jeans fronts.
39500CRU (3/16" seam width)
Same as 39500RU, except with pneumatic Air Klipp® chain
cutter. |
|
|
Model
(For Hosiery & Socks) |
39500RB, XERB, RBAC |
39500HUGC |
39500CRC045 |
39500RC060, CRC060, XERC060 |
39500UEZ196A |
39500ST |
39500TA, XETA |
| Needle |
154GFS065/025~080/032 |
154GDS070/027-090/036 |
154GAS055/022-090/036 |
standard
065/025 |
standard
075/029 |
standard
075/029 |
standard
055/022 |
standard
070/027 |
| Material Weight |
light weight hosiery & knit socks |
| Stitch Length Adj. |
by changing stitch cams |
| Differential Feed
Adj. |
by changing stitch cams |
| Lubrication |
automatic |
| Lubricating Oil |
Union Special Spec 175 (ISO grade
22) |
| Stitch Type |
521 |
514 |
521 |
504 |
505 |
| Seam Type |
SSa-1 |
SSp-1 |
SSn-1 |
| 39500RB |
2 |
3 |
1/8" |
.25~1.3
(1.3 standard) |
L |
8000
RPM |
| 39500XERB |
2 |
3 |
1/8" |
.25~1.3
(1.3 standard) |
L |
9000
RPM |
| 39500ST |
1 |
3 |
1/16" |
.25~1.3
(1.3 standard) |
L |
8000
RPM |
| 39500TA |
1 |
3 |
1/16" to 3/32" |
.25~1.7
(.85 standard) |
L |
8000
RPM |
| 39500XETA |
1 |
3 |
1/16" to 3/32" |
.25~1.7
(.85 standard) |
L |
9000
RPM |
| 39500HUGC |
2 |
4 |
1/8" |
.6.~1.8
(1.8 standard) |
L |
8000
RPM |
| 39500RBAC |
2 |
3 |
7/32" |
.6~2.1(1.8 standard) |
L |
8000
RPM |
|
39500UEZ196A |
2 |
3 |
7/32" |
.25~2.1
(1.6 standard) |
L |
8000
RPM |
| 39500RC060
and CRC060 |
2 |
3 |
7/32" |
.85~1.3
(1.3 standard) |
L |
8000
RPM |
|
39500CRC045 |
2 |
3 |
7/32" |
.85~1.3
(1.3 standard) |
L |
8000
RPM |
|
39500XERC060 |
2 |
3 |
7/32" |
.85~1.3
(1.3 standard) |
L |
9000
RPM |
|
 |
SEAMING HOSIERY
LIGHT WEIGHT39500RB1/8 (1/8" seam width)
2 needle, 3 thread differential feed curved needle Mark
IV overedge, with rubber feed dogs and rubber insert on threat
plate. For closing the toe of women’s stockings, pantyhose,
leotards and similar lightweight nylon and synthetic materials.
39500XERB1/8 (1/8" seam width)
Same as 39500RB, except in 9M (9000 RPM) with external
oil pump and oil cooler.
39500ST (1/16" seam width)
1 needle, 3 thread differential feed curved needle
Mark IV overedge, with sewing combination to produce a turned
own rolled hem for tighter seams. For closing the toe of
women’s stockings, pantyhose, leotards and similar lightweight
nylon and synthetic materials.
39500TA (1/16" ~ 3/32" seam width)
1 needle, 3 thread differential feed curved needle
Mark IV overedge, with sewing combination to produce an turned
down hem, adjustable from 1/16" to 3/32" wide (1.6~2.4mm) For
closing the toe of women’s stockings, pantyhose, leotards and
similar lightweight nylon and synthetic materials. Also for edge
finishing handkerchiefs and scarves.
39500XETA (1/16" ~ 3/32" seam width)
Same as 39500TA, except in 9M (9000 RPM) with external
oil pump and oil cooler.
39500HUGC (1/8" seam width)
2 needle, 4 thread differential feed curved needle
Mark IV overedge, with mechanical driven side action chain
cutter. For closing the toe of seamless women’s pantyhose.
For use on automated toe closing units.
39500RBAC (7/32" seam width)
2 needle, 3 thread differential feed curved needle
Mark IV overedge, with mechanical driven side action
chaincutter. For crotch seaming women’s nylon pantyhose.
For use on automated crotch seaming units.
39500UEZ196A (7/32" seam width)
2 needle, 3 thread differential feed curved needle
Mark IV overedge. For closing the toes of men’s hosiery.
For use on automated toe closing
units. |
|
 |
SEAMING SOCKS
LIGHT TO MEDIUM WEIGHT39500RC060 (.060"
seam width)
2 needle, 3 thread differential feed curved needle
Mark IV overedge, with 22 TPI feed dogs. For closing
the toes of men’s socks and anklets.
39500CRC045 & 060 (.045" & .060" seam widths)
Same as 39500RC, except with pneumatic Air Klipp® chain
cutter.
39500XERC045 & 060 (.045" & .060" seam
widths) Same as 39500RC, except in 9M (9000 RPM) with
external oil pump and oil cooler. |
|
